Design and Test of Combined Garlic Flexible Peeling Device

LI Xinping, SUN Chenchen, ZHANG Wantong, WANG Shengsheng, GAO Lianxing

Abstract

In order to solve the problems of low peeling rate and easy damage of garlic kernel, a combined garlic flexible peeling device was designed. The garlic peel was separated by the floating rubbing unit, and the vibration mechanism completed the transportation. The garlic peel was flexible peeled by the combined action of floating rubbing, vibrating brush and air blowing. According to the physical and mechanical characteristics of garlic, the key components such as rubbing mechanism, vibration mechanism, brushing mechanism, air blowing mechanism were designed. Through the dynamic analysis of garlic cloves in the floating rubbing unit and the vibrating screen, the main factors and value range that affected the peeling performance test were determined. Taking the rotational speed of the rubbing cylinder shaft, the comb brush spacing and the crank rotational speed as the test factors, and the peeling rate and the breakage rate as the test indexes, the three-factor three-level response surface test was carried out to obtain the optimal parameter combination of the rubbing cylinder shaft rotational speed, the comb brush spacing and the crank rotational speed, and the test verification was carried out. The test results showed that the optimal parameter combination was the rotation speed of rubbing roller shaft of 70.73r/min, vibration frequency of 6.68Hz, comb brush clearance of 18.00mm. Under the optimal parameter combination, the peeling rate of garlic cloves was 93.68% and the damage rate was 4.40%. The relative error between the test verification results and the optimization results was less than 5%, which met the requirements of garlic peeling.


Keywords: garlic peeled device, floating rubbing, vibration, comb brush

 

Download Full Text:

PDF


References


JIA Shengtao, NIU Changhe, WANG Xuenong, et al. Research and experiment of Xinjiang garlic materials and mechanical properties[ J ]. Journal of Chinese Agricultural Mechanization, 2021 , 42(5) : 81 -86. (in Chinese)

XU Tao. Study on mechanical properties and testing methods of garlic seeds [ D]. Zibo: Shandong University of Technology, 2017. (in Chinese)

BAYAT F, REZVANI S. Effect of harvesting time and moisture on mechanical properties of garlic ( Allium sativum L. ) skin [j]. Agricultural Engineering International: CIGR Journal, 2012, 14(3): 161 -167.

MAN1NDER K, PREETINDER K, AMARJ1T K, et al. Gineering properties of peeled and unpeeled garlic cloves [ J ]. Agricultural Research Journal, 2017, 54( 1 ): 85 —89.

KAN Zhixiang, MENG Baoxing, LI Rongbing, et al. A design of small hand garlic peeling machine [ J ]. Farm Products Processing, 2016( 1 ) : 47 —48. (in Chinese)

RAJESH K. Design and fabrication of garlic peeler [ J ] . International Journal of Advanced Engineering Research and Science, 2018, 5(7) : 165 - 170.

MANJUNATHA M, SAMUEL D V K, ANURAG R K, et al. Development and performance evaluation of a garlic peeler [ J ] . Journal of Food Science and Technology, 2014, 51(11): 3083 -3093.

MUDGAL V D, CHAMPAWAT P S. Development of a garlic clove peeler for small scale industrvfj]. International Journal of Food Engineering, 2011 , 7(3) : 1-6.

LI Xinping, WANG Wenzhe, ZHAO Gaoyuan, et al. Design and experiment of longitudinal axial flow double flexible rolling and kneading threshing device for m illet [ J ]. Transactions of the Chinese Society for Agricultural Machinery, 2021 , 52 ( 7 ) : 113 - 123. (in Chinese)

W'U Kun, SONG Yuepeng. Research progress analysis of crop stalk cutting theory and method[J]. Transactions of the Chinese Society for Agricultural Machinery, 2022, 53(6) : 1 -20. (in Chinese)

IIOU Jialin, WANG Houxin, NIU Ziru, et al. Discrete element simulation and experiment of picking and clearing performance of garlic seed-picking device[J]. Transactions of the CSAE, 2019, 35(24) ; 48 -57. (in Chinese)

JIA Jiangming, YE Yuze, CHENG Peilin, et al. Design and experimental optimization of hand-held manipulator for picking famous tea shoot [J ]. Transactions of the Chinese Society for Agricultural Machinery, 2022, 53(5) : 86 -92. (in Chinese)

CHEN Hong, XU Xiangzhou, YIN Yijun, et al. Experimental study on mechanical properties and peel separation characteristtics of citrus reticulate bianco with peel clamped moving[ J]. Transactions of the CSAE, 2017, 33( 14) ; 25 —31. ( in Chinese)

CHEN Zhengguang, WANG Defu, LI Liqiao, et al. Experiment on tensile and shearing characteristics of rind of corn stalk [J]. Transactions of the CSAE, 2012, 28(21) ; 59 -65. (in Chinese)

XU Lizhang, LI Yang, LI Yaoming, et al. Research progress on cleaning technology and device of grain combine harvester [J] . Transactions of the Chinese Society for Agricultural Machinery, 2019, 50( 10) ; 1 - 16. (in Chinese)

GAO Lianxing, LI Xianqi, GUAN Meng, et al. Design and test on cleaning device of peanut pods with double air-suction inlets with vibration screen [ J ]. Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(3 ): 110 -117. (in Chinese)


Refbacks

  • There are currently no refbacks.