Design and Experiment of Electrostatic Impurity Removal Device for Honeysuckle

WANG Fenghua, LIN Yuhong, LAI Qinghui, WANG Yongjie, TIAN Baoning, SU Wei

Abstract

Based on electrostatic separation technology, an electrostatic removal device for honeysuckle was designed to solve the problem of poor removal of woven bag filaments in the removal process. Through theoretical analysis, the critical conditions for the trajectory separation of honeysuckle and woven bag filaments in the electrostatic field were deduced, and the feasibility of electrostatic separation technology for honeysuckle impurity removal was verified. Single-factor experiments and COMSOL simulations were used to investigate the effects of electrostatic electrode shape, output voltage U of the high voltage electrostatic generator, electrostatic electrode angle α, the distance L between the electrode and the roller, and roller speed N on the removal performance. The electrode shape was determined as a circular arc, and the αwas set to be 45°. The quadratic regression equations for the removal rate and the false removal rate were established by the Box-Behnken experiment, respectively. Response surface analysis was used to explore the influence of each experiment factor on the experiment index. The optimum operating parameters of the device were determined to be U=11.9kV, N=28r/min, and L=60mm. The results of the bench experiment showed that the impurity and false removal rates were 94.47% and 0.89% respectively, which met the requirements for removing impurities from honeysuckle. The device proposed effectively removed woven bag filaments from honeysuckle and may provide a reference for the design of similar herb removal devices.


Keywords: honeysuckle, electrostatic impurity removal, electric field, COMSOL

 

Download Full Text:

PDF


References


ZHOU Jie, ZOU Lin, LIU Wei, et al. Study on commercial specification of lonicerae japonicae flos[ J ]. Journal of Chinese Medicinal Materials, 2015 ,38(4 ) : 701 -705. (in Chinese)

KANG Jianming, XIE Chenshuo, WANG Xiaoyu, et al. Design and test of screen hole clearing device for trommel sieve type membrane miscellaneous wind separator [ J ]. Transactions of the Chinese Society for Agricultural Machinery ,2022 ,53 ( 9 ) : 91 - 98. (in Chinese)

WANG Qinming. Simulation and improvement of structure on the flow field of tea winnowing machine based on FLUENT [ D]. Kunming: Kunming University of Science and Technology, 2017. (in Chinese)

GUO Bingjiang, MA Xuedong, ZHAO Lei, et al. Simulation research of grain multi-stage wind selection based on DEM — CFD coupling [J] . Journal of Chinese Agricultural Mechanization ,2019 ,40( 10) :96 - 102. ( in Chinese)

CHAI Runze, Y E Song, XIONG Wei. Sorting of Chinese prickly ash based on shape feature [J] . Journal of Guilin University of Electronic Technology,2021 ,41(5) ;382 -386. (in Chinese)

LI Tianhua, AO Bangqian, YANG Fang. Study on AFTBl rice screening technology founded on CMOS image transducer [ J ]. Journal of Agricultural Mechanization Research ,2013 ,35( 3 ) : 221 -223. (in Chinese)

LU Bing, HU Can, WANG Xufeng, et al. Design and experiment on vibrating sieve type jujube multilayer purification and grader machine [J ]. Journal of Agricultural Mechanization Research ,2017 ,39 ( 1 ) : 152 - 157. (in Chinese)

LI Xuanfu, XING Jianfei, HU Can, et al. Application and development prospect of electrostatic technology in agriculture [J ]. Xinjiang Agricultural Mechanization,2022( 1 ) :18 —21. (in Chinese)

WEI Liuhua, YANG Lilin, ZHANG Lingyun, et al. Research progress of high voltage electrostatic technology applied in the field of agricultural production [ J ]. Agriculture and Technology ,2021 ,41 (3 ): 19 - 23. (in Chinese)

GUO Shuxia, KAN Za, ZHANG Ruoyu, et al. Separation test of electrostatic separating device for machine-harvested seed cotton and plastic film residue [ J]. Transactions of the CSAE,201 1 ,27(Supp. 2) ;6 - 10. ( in Chinese)

JAFARI M, CHEGINI G, AKMAL A, et al. A roll-type corona discharge-electrostatic separator for separating wheat grain and straw particles [J ]. Journal of Food Process Engineering ,2019 ,42 (7 ) : el 3281.

YANG Yongfa, ZHANG Ying, CHEN Shuai. Effects of electrostatic potentials on stalk rate [ J ]. Food & Machinery,2015, 31(1) ;86 — 89. (in Chinese)

MOHAMED M, WESSIM A, FODIL В M, et al. Modeling and simulation of nonconductive particles trajectories in a multifunctional electrostatic separator [ J ]. IEEE Transactions on Industry Applications,2019 ,55( 5 ) :5244 -5252.

DAS S, SAMUILA A, DRAGAN C, et al. Behaviour of charged insulating particles in contact with a rotating roll electrode J . Journal of Electrostatics ,2008 ,67 ( 2 ) ; 189 - 192.

LI Jia, LU Hongzhou, XU Zhenming, et al. Critical rotational speed model of the rotating roll electrode in corona electrostatic separation for recycling waste printed circuit boards [J ]. Journal of Hazardous Materials ,2008 ,154( 1 ) ;33 1 -336.

DASCALESCU L, MORAR R, IUGA A, et al. Charging of particulates in the corona field of roll-type electroseparators[ J ]. Journal of PhysicsD ; Applied Physics, 1994,27(6) : 1242.

LI Xuanfu. Design and experiment of membrane — stubble separation device under high voltage electrostatic adsorption [ D]. Tarim: Tarim University,2022. (in Chinese)

LI Tuyu. High-voltage triboelectrostatic separation and kinetic characteristics of plastic used in passenger vehicle [ D ]. Kunming: Kunming University of Science and Technology, 2018. (in Chinese)


Refbacks

  • There are currently no refbacks.