Design and Experiment of Rectangular Bale Multipack

GAO Xuhong, XU Xiangyang, WANG Shuhan, LIU Liqiang, ZHAO Wei, LI Yang

Abstract

A new rectangular bale multipack was designed to solve the difficulty of low efficiency, high costs and transportation inconvenience in the process of collecting rectangular bale. The rectangular bale multipack was composed of chassis, pickup, pushing bale device, raising bale device, pressuring line device and unloading bale device, etc. Based on EPEC2024 controller, the pump, motors and cylinders were drived to make some rectangular bales into one big rectangular bale. In operation, the rectangular bale multipack had the ability of collecting 12 rectangular bales at one time. The maximum driving speed of the rectangular bale multipack exceeded 20.5 km/h and the maximum hydraulic flow was 101.6 L/min. The field experiments for picking up rectangular bale and straw rectangular bale were carried out in Inner Mongolia and Liaoning Province, respectively. The test results showed that collecting bale rate and collecting bale productivity of the rectangular bale multipack was 89.5% and 12 bdl/h, respectively. Compared with artificial operation, the collecting bale efficiency was improved by 34.5%, meanwhile, the artificial costs and composite expenses were declined by 62.5% and 18.2%, respectively. The preparation cycle for long-distance transportation was also cut down. All of the works, including picking up and packing some rectangular bales were done by one operator driving the tractor simultaneously, and the rectangular bale multipack can meet reality needs.

 

Keywords: rectangular bale, multipack, design, experiment

 

Download Full Text:

PDF


References


SHAO Shilu,HAN Zhengsheng, WEI Hongan. Development of machinery used for pasture harvesting in China [J ]. Pratacultural Science,2010 ,27(5 ) : 152 - 156. (in Chinese)

MA Guoyu,YUAN Hongfang,LIU Pengjun,et al. Research survey on demand of Chinese forage machine at present [J ]. Journal of Agricultural Mechanization Research,2011 ,33(2) :222 -225. ( in Chinese)

WAN Qihao, WANG Decheng, WANG Guanghui,et al. Design and experiment of self-propelled grass silage combined bagging Machine [ J ]. Transactions of the CSAE ,2014 ,30( 19 ) ;30 - 37. ( in Chinese)

WANG Sheng. Study on the relationship between the mechanization of herbage harvest and the development of grass industry D]. Lanzhou: Gansu Agricultural University ,2008. (in Chinese)

ZHAO Manquan, ZHANG Ning, VANG Tiejun,et al. Design and experiment of virtual prototype of double disc mower cutter[J/ OL]. Transactions of the Chinese Society for Agricultural Machinery ,2014 ,45 ( 8 ) ;101 - 105. ( in Chinese)

http://www.j-csam.org/jcsam/ch/reader/view_abstract. aspx? file_no = 20150719&flag = 1. 1)01; 10.6041 /j. issn. 1(XX)-1298. 2015.07.019. WU Bei,WANG Decheng, WANG Guanghui,et al. Simulation analysis and experiment of proiiling device of small self-propelled mower[ J/OL ]. Transactions of the Chinese Society for Agricultural Machinery ,2015 ,46(7 ) : 123 - 129. ( in Chinese)

ZHANG Ning. Kinetic analysis and virtual prototype design of the dual disc mower crucial components [D]. Hu Idiot; Inner Mongolia Agricultural University,2014. (in Chinese)

ZHAI Gaixia, LIU Guilin, HE Gang, et al. Design and experiment on the horizontal rotary rake [ J]. Journal of Agricultural Mechanization Research,2014,36(7) ;168 - 173. ( in Chinese)

LIN Jiaqing. Optimization design and simulation research on new type of straw-raking mechanism [D]. Zhenjiang: Jiangsu University,2013. (in Chinese)

YANG Li,LIU Guilin,WANG Zhenhua,et al. Design and experiment of engine-driven constant frequency rectangular pickup baler [J].1 Transactions of the Chinese Society for Agricultural Machinery,201 I ,42(Supp. ) ; 147 - 151. ( in Chinese)

WANG Zhenhua,WANG Decheng,LIU Guilin,et al. Pickup parameters design of square baler[ J ]. Transactions of the Chinese Society for Agricultural Machinery,2010,41 (Supp. ) : 107 - 109. (in Chinese)

WANG Fengde,CHEN Zhi,WANG Junyou,et al. Design and experiment of 4YF — 1300 large rectangular baler[J]. Transactions of the Chinese Society for Agricultural Machinery,2009,40( 1 1 ) :36 -41. ( in Chinese)

BA Longye. Square hay haler design and hailing room finite element analysis based on ansys [ D]. Iluhhot: Inner Mongolia Agricultural University,2013. (in Chinese)

W ANG Defu,ZHANG Quanguo. Improvement of round baler for rice straw ensiling[J ]. Transactions of the CSAE ,2007 ,23 ( 11): 168-171. (in Chinese)

http;// www. j-csam. org/jcsam/ch/reader/view_abstract. aspx? file_no = 2016s039&flag = 1. DOI; 10. 6041/j. issn. 1000-1298.2016. SO.039. HAO Xingyu,HE Gang, DONG Jiajia, et al. Improved design and test on collecting wagon of rectangular bale based on ARIZ algorithm [J ]. Transactions of the Chinese Society for Agricultural Machinery ,2016,47 ( Supp. ) : 254 -260,316. (in Chinese)

ANDREA Vacca, GIOVANNI Campanella. Modeling and optimization of the control strategy for the hydraulic system of an articulated boom lift[ C]//SAE Commercial Vehicle Engineering Congress,2010;427 -445.

WANG Weiwei. Load sensitive system dynamic characteristics and energy-saving analysis[ D]. Qinhuangdao; Yanshan University, 201 1. ( in Chinese)

GAO Xuhong,XU Xiangyang,SUN Di. Application of sensors in the self-propelled aerial work platform [J ]. Instrument Technique and Sensor,2016( 6 ) :84 -87. ( in Chinese)


Refbacks

  • There are currently no refbacks.